Configure Your Device; Configure Axis Camera Station - Axis S1132 User Manual

AXIS Camera Station S1132 Recorder

Configure your device

Configure your device

Configure AXIS Camera Station

This Get started tutorial will walk you through the basic steps to make your system up and running.
Before you start, you may need to:
• Configure your network depending on your installation. See Network configuration.
• Configure your server ports if needed. See Server port configuration.
• Consider security issues. See Security considerations.
After necessary configurations, you can start to work with AXIS Camera Station:
1. Start AXIS Camera Station
2. Add devices
3. Configure recording method on page 12
4. Live view cameras on page 13
5. Replay recordings on page 13
6. Add bookmarks on page 13
7. Export recordings on page 13
8. Play and verify recordings in AXIS File Player on page 14
Start AXIS Camera Station
AXIS Camera Station Service Control automatically starts after the installation is complete.
Double-click the AXIS Camera Station Client icon to start the AXIS Camera Station client. When starting the client for the first time,
it automatically attempts to log on to the AXIS Camera Station server installed on the same computer as the client.
You can connect to multiple AXIS Camera Station servers in different ways.
Add devices
The first time you start your AXIS Camera Station, you are navigated to the Add devices page. AXIS Camera Station automatically
searches the network for connected devices and displays a list of devices found.
1. Select the cameras to add from the list.
If your camera is not listed, click Manual search.
2. Click Add.
3. Select Quick configuration or Site Designer configuration. Click Next.
4. Use the default settings and ensure the recording method is set to None. Click Install.
Configure recording method
1. Go to Configuration > Recording and events > Recording method.
2. If you want to enable motion detection recording:
2.1 Select a camera.
12