Description - Echo PB-2350 Operator's Manual

1. Blower pipes Exclusive positive locking system.
2. Air cleaner Contains replaceable air filter element.
3. Starter handle Pull recoil handle slowly until recoil starter
engages, then quickly and firmly. When engine starts,
return handle slowly. DO NOT let handle snap back or
damage to unit will occur.
4. Fuel tank cap Covers and seals fuel tank.
5. Spark plug Provides spark to ignite fuel mixture.
6. Spark arrestor - Catalytic muffler / Muffler The muffler
or catalytic muffler controls exhaust noise and emission.
The spark arrestor screen prevents hot, glowing parti-
cles of carbon from leaving the muffler. Keep exhaust
area clear of flammable debris.
7. Purge bulb Pumping purge bulb before starting engine
draws fresh fuel from the fuel tank, purging air from the
carburetor. Pump purge bulb until fuel is visible and
flows freely in the clear fuel tank return line. Pump
purge bulb an additional 4 or 5 times.

Description

8. Choke Choke is located on top of the air cleaner. Move
choke lever to
ing. Move choke lever to
9. Throttle position lever Pull back to increase engine
speed. Friction washers maintain throttle lever setting.
10. Stop switch "SLIDE SWITCH" mounted on top of han-
dle. Push forward to start and run. Slide back to stop.
11. Throttle trigger Spring loaded to return to idle when re-
leased. During acceleration, press trigger gradually for
best operating technique.
12. Housing cover Covers blade area and activates safety
interlock switch when closed. Engine will not run if safe-
ty switch is not activated.
13. Debris bag Collects shredded material.
14. Vacuum tube Sucks in materials to be shredded.
15. Vacuum elbow Discharges shredded material.
13
Description
position to close choke for cold start-
position to open choke.