Table of Contents
Advertisement
8
www.aeg.com
We recommend that you
keep the packaging and the
transit bolts for any
movement of the appliance.
4.2 Positioning and levelling
1. Install the appliance on a flat hard
floor.
Make sure that carpets do
not stop the air circulation
below the appliance.
Make sure that the
appliance does not touch
the wall or other units.
2. Loosen or tighten the feet to adjust
the level.
WARNING!
Do not put cardboard, wood
or equivalent materials
below the appliance feet to
adjust the level.
The appliance must be level and stable.
4.3 The inlet hose
1. Connect the water inlet hose to the
back of the appliance.
2. Position it toward left or right
depending on the position of the
water tap.
3. If necessary, loose the ring nut to set
it in the correct position.
4. Connect the water inlet hose to the
cold water tap with 3/4" thread.
x4
A correct adjustment of the
appliance level prevents the
vibration, noise and the
movement of the appliance
when in operation.
O
O
20
20
Make sure that the inlet hose
is not in vertical position.
O
O
45
45
Advertisement
Table of Contents
