System Settings - Sanyo DVP2902 User Manual

A

System Settings

You can change the display functions. Follow steps 1 and 2 on page 16.
3
Select the desired item.
<System menu>
Voice Guide On
System
TV Display Off
Language
HDMI Video
EasyLink
Audio
1 Touch Play
1 Touch Standby
Video
Preference
Note:
HDMI video:
– Auto:
HDMI video resolution will be selected automatically depending on the connected HDMI device.
EasyLink:
• EasyLink allows integrated system control over HDMI and is part of the HDMI standard. This function may not work
properly depending on the device connected to the unit. When "EasyLink" setting is set to "On" the functions listed below
will be available.
 One touch play
When the buttons below on the remote control are pressed then operations are performed on this unit, the TV will
automatically be turned on and switched to the appropriate video input.
Buttons for one touch play:
- [PLAY B], [SKIP H , G], [INFO], [SETUP]
- [TOP MENU], or [MENU] (when a disc is inserted in the unit)
 One touch standby
When you press and hold [POWER] for 2 seconds, it turns off the TV first, then turns off this unit.
When the connected EasyLink (HDMI CEC) compatible display device is turned off first, it then turns off the power to this
unit.
 System information
Get & set menu language
The unit recognizes the OSD language set on the TV and automatically sets the same language as the on-screen language
in "Menu" setting.
Feature is available only when "Menu" in "LANGUAGE" menu is set to "Auto" while connected via an HDMI cable.
EN
4
Voice Guide: (Default: On)
Turns on/off the voice guide function.
Voice Guide On
TV Display Off
ge HDMI Video
EasyLink
1 Touch Play
1 Touch Standby
TV Display: (Default: 16:9 Widescreen)
Sets the aspect ratio of the playback image to fit your TV.
See the note on the right.
Voice Guide 4:3 Crop
TV Display 4:3 Normal
ge 16:9 Widescreen
HDMI Video
EasyLink 16:9 Squeeze
1 Touch Play
1 Touch Standby
HDMI Video: (Default: Auto)
You can select the desired "HDMI Video" among the
settings. See the note on the right.
Voice Guide Auto
TV Display 480P
ge
HDMI Video 720P
EasyLink 1 080i
1Touch Play 1080P
1 Touch Standby
EasyLink: (Default: On)
EasyLink allows integrated system control over HDMI.
See the note below.
Voice Guide On
TV Display Off
ge
HDMI Video
EasyLink
1 Touch Play
1 Touch Standby
– 17 –
Select the desired
setting.
5
To Exit the Menu
Note(s):
Voice Guide:
• In order to enable the
voice guide function, the
OSD language needs to
be set to English. Voice
guide is not available in
French or Spanish.
• "HDMI Audio" cannot be
configured when voice
guide is set to On, as it is
fixed to PCM. In order to
configuring the setting,
set voice guide to off.
TV Display:
• Select "4:3 Crop" for a
full height picture with
both sides adjusted.
• Select "4:3 Normal",
black bars may appear
on the top and bottom
of the TV screen.
• Select "16:9 Widescreen"
if a wide-screen TV is
connected to this unit.
• Select "16:9 Squeeze" to
display 4:3 aspect ratio
in the center of the 16:9
screen when playing
back 4:3 images.