Table of Contents
Advertisement
A
B
Mod. xxxxxxxxx
Prod.No.
C
000V ~ 00Hz 0000 W
D
5. INSTALLATION
WARNING!
Refer to Safety chapters.
5.1 Unpacking
1. Open the door. Remove all the items
from the drum.
Accessories delivered
with the appliance may
vary depending on the
model.
2. Put the packaging element on the
floor behind the appliance and
carefully put it down onto its rear
side. Remove the polystyrene
protection from the bottom.
CAUTION!
Do not lay washing machine
on its front.
3. Put the appliance back into an
upright position. Remove the power
supply cable and the drain hose from
910000000 00
00A
00000000
1
The rating plate reports the model name (A) ,
product number (B), electrical ratings (C) and
serial number (D).
the hose holders.
WARNING!
It is possible to see
water flowing from the
drain hose. This is
because the washing
machine has been
tested at the factory.
4. Remove the three bolts by using the
key supplied with the appliance. Pull
out the plastic spacers.
We recommend that you
keep the packaging and
the transit bolts for any
transport of the appliance.
2
5. Put the plastic caps, that you find in
the user manual bag, in the holes.
ENGLISH
9
Advertisement
Table of Contents
