Panasonic WV-S2131LPJ Manual page 17

■Terminals
D Audio output connector
S2131L
C Audio input connector
S2131L S2111L
F
ANetwork connector (RJ45)
Connect an Ethernet cable (category 5e or better) to the network connector.
IMPORTANT:
⿟ Use all 4 pairs (8 pins) of the Ethernet cable.
⿟ Make sure that the PoE device in use is compliant with IEEE802.3af standard.
⿟ When connecting both the 12 V DC power supply and the PoE device for power supply, 12 V
DC will be used for power supply.
⿟ When the Ethernet cable is disconnected once, reconnect the cable after around 2 seconds.
When the cable is quickly reconnected, the power may not be supplied from the PoE device.
* This illustration represents WV-S2131L
A Network connector (RJ45)
S2111L
E EXT I/O terminals
S2131L S2111L
MONITOR OUT terminal
(factory shipment: NTSC monitor)
S2131L
B 1 2 V DC power supply terminal
S2131L
S2111L
17
S2111L