Table of Contents
Advertisement
1. Bolt
2. Bracket
(7) Place the fuel tank in its original position,
and then install the bolts.
1
1. Bolt
(8) Insert the knotted end of the emergency
starter rope into the notch in the flywheel
magnet and wind the rope several turns
around the flywheel magnet clockwise.
1
1. Notch
2. Emergency starter rope
1
2
2
Trouble Recovery
(9) Attach the engine shut-off cord to a se-
cure place on your clothing, or your arm
or leg. Then, install the clip on the other
end of the cord to the engine shut-off
switch.
2
1. Clip
2. Engine shut-off cord (lanyard)
3. Engine shut-off switch
(10) Align the engine start mark " " on the
throttle grip with the notch in the tiller
handle.
2
1. Start mark " "
2. Notch
(11) Give a strong pull straight out to crank
and start the engine.
3
1
1
64
Advertisement
Table of Contents
