Onboard Leds - Asus ROG STRIX Z370-G GAMING Manual

2. CPU Over Voltage jumper (3-pin CPU_OV)
The CPU Over Voltage jumper allows you to set a higher CPU voltage for a flexible
overclocking system, depending on the type of the installed CPU. To gain more CPU
voltage setting, insert the jumper to pins 2-3. To go back to its default CPU voltage
setting, insert the jumper to pins 1-2.
ROG STRIX Z370-G GAMING CPU_OV setting
1.1.7

Onboard LEDs

1. POST State LEDs
The POST State LEDs provide the status of these key components during POST
(Power-On Self-Test): CPU, memory modules, VGA card, and hard disk drives. If an
error is found, the critical component's LED stays lit up until the problem is solved.
ROG STRIX Z370-G GAMING
CPU/DRAM/BOOT_DEVICE/VGA LED
1-10
®
®
BOOT (YELLOW GREEN)
VGA (WHITE)
DRAM (YELLOW)
CPU (RED)
Chapter 1: Product Introduction