Assembly Guide
Read and follow the assembly instructions carefully. Remove the
Strider from the carton and place all parts in an area that has
been cleared. Remove all packing materials from the area and
place them back into the carton. Do not dispose of the packing
materials until assembly is complete.
Step 1
Find Stabilizer (3) with Endcaps (14), then attach Stabilizer (3) onto
the Base Frame (2) with Carriage Bolts (9.5 mm x 63.5 mm L) (31),
Acorn Nuts (9.5 mm) (32) and Arc Washers (9.5 mm) (27).