Timer Operation - Fujitsu ASTG30CMTA Operating Manual

Timer Operation

Note for timer settings:
Any interruption of the power supply, such as a blackout or cutting off of a circuit breaker, makes the set internal clock go wrong.
In such a case, the TIMER indicator on the indoor unit blinks, and you need to readjust the setting.
ON timer or OFF timer
You can set the ON timer or OFF timer with the following steps.
Press the "TIMER SETTING" button to start the setting.
1
The WEEKLY indicator will be flashing on the remote controller.
Press the "SELECT" button to choose the desired mode. The
2
mode will change as follows:
ON/OFF
WEEKLY
(ON)
Press the "NEXT" button. Continue to setting for each mode.
3
* To cancel timer setting during the setting process, press the
"TIMER SETTING" button again.
Adjust the time by pressing the "SELECT" button while the clock
4
indicator is blinking. Each time you press the button, the time will
change by +5/-5 minutes. Pressing down will change the time by
+10/-10 minutes.
Press the "SEND" button.
5
To redo the timer setting, perform step 1 to 5 again.
To cancel the ON/OFF timer, press the "ON/OFF" button while the ON/
OFF indicator is on. (Erases the indicator)
Program timer (combined use of the ON timer and the OFF timer)
You can set an integrated ON→OFF or OFF→ON timer.
Either of the timer whose configured starting time is closer to the
current time works first, and the order of timer operation is displayed
as follows:
Timer
→
ON OFF timer
→
OFF ON timer
To set the program timer, conduct the same steps ①~⑤ for the ON/
OFF timer. (Select ON ⇔ OFF in Step 2)
Notes:
• If you change the setting value for the timer after the program timer
is set, the counting down of the timer will be reset at that moment.
• Time setting for each combination should be within a span of 24 hours.
SLEEP timer
To set the SLEEP timer, first follow steps ①~③ for the ON/OFF timer.
Adjust the time by pressing the "SELECT" button while the clock
4
indicator is blinking.
Each time you press the button, the time changes as follows:
0H 1H
30M 00M
(30 min.)
Press the "SEND" button.
5
To cancel the SLEEP timer, press the "SLEEP" button while the
SLEEP indicator is on. (Erases the indicator)
To help you to fall asleep comfortably and prevent excessive
cooling in sleep, the SLEEP timer controls the temperature setting
automatically in accordance with the set time shown as follows. The
air conditioner completely turns off after the set time has elapsed.
In COOL or DRY mode
Set
temperature
En-6 OPERATING MANUAL
ON/OFF ON/OFF
(OFF) ⇔
(ON OFF)
Indicator on remote controller display
2H 3H 5H 7H
00M 00M 00M 00M
Set time
1 hour
1 °C 2 °C
WEEKLY timer
ON and OFF timer can be combined, and up to 4 reservations (program
) per day and 28 reservations per week.
Before setting the program, please set the week and time of the air
conditioner first.
If the week and time are not set, the weekly timer will not operate
correctly at the set time.
Please refer to "remote controller preparation" (page 2).
SLEEP
Example of WEEKLY timer 1
(OFF)
Program
Monday to
7:00 ON 26°C
Friday
Wake up
Saturday
Program
Sunday
ON
9:00 OFF
Example of WEEKLY timer 2
You can specify a given temperature in the ON setting in WEEKLY
timer.
Program
7:00 ON 28°C
* You can set the temperature for AUTO, COOL, and DRY modes within
the range of 18-30°C.
Notes:
● Operations modes other than the temperature setting will be the
same at the last time operation was stopped, so Cooling → Dry→
Cooling → Dry type of operations cannot be automatically set.
● If you set the ON timer and OFF timer on the same time, the air
conditioner will run the ON timer. If two ON timer are set at the
same time, the air conditioner will run in the order of the program
number.
● If there is a power interruption, such as due to a power outage
during the WEEKLY timer setting or a circuit breaker cutting out,
the internal timer of the air-conditioning will be incorrect. (See page
9H
9 "Auto-restart".) In such a case, the main timer lamp will notify
00M
hours
you of this by flashing, so carry out matching of the time and date.
(See page 2 "remote controller preparation".)
● You cannot use the WEEKLY timer together with the other timers.
If you want to run the product on WEEKLY timer after using the ON/
OFF Timer, Program Timer, or SLEEP Timer while the WEEKLY
timer is running, you need to activate the WEEKLY timer again.
Program Program
9:00 OFF 17:00 ON 28°C
Leave for work Come back home
No timer settings
Program Program
ON ON
11:00 OFF 17:00 OFF
Program Program
9:00 ON 26°C 17:00 ON 27°C
Program
23:00 OFF
Go to sleep
Program
ON
23:00 OFF
Program
23:00 ON 28°C
(continued)