HP StorageWorks Reference Manual page 22

1. Insert the pins in front mounting plate of the outer rack rails into the previously marked holes in
the front vertical mounting bars of the rack. See
place.
2
Figure 16 Installing the rack rails in front of rack
NOTE: To remove the rail for repositioning, push the spring-loaded tab
rack rail and slide it forward
2. Extend the rack rails past the rear vertical mounting bar and insert the pins in the mounting
bracket into the previously marked holes in the rack. See
securely into place when the end of the rails are pushed forward.
F R
O N
T
1
Figure 17 Installing the rack rails in rear of rack
22 Rack Installation
1
4
3
.
4
1
Figure 16. The rack rails will lock securely into
1
F R
O N
T
1
15116
Figure
2
4
3
15117
on the outside of the
3
17. The rack rails will lock