Table of Contents
Advertisement
3 MAKING USE OF USB
-For USB Compliant System Environments-
The Desktop Stand Type provides a hub which supports the USB (Universal
Serial Bus) standard. When connecting to a USB compliant PC or another
hub, the monitor functions as a hub to which USB compliant peripherals
can be connected. The USB standardized connectors enable the easy
connection with these peripherals.
• To utilize the USB hub function, the following system environment is
required.
• PC equipped with USB ports or another USB hub connected to
• OS (Windows 98/Mac OS 8.5.1 or newer)
• EIZO USB cable (MD-C93, enclosed)
• Do not connect any peripherals until finishing USB function setup.
• The USB hub function may not work properly with some systems.
Please consult the manufacturer of each system for details about this
feature.
• When the monitor is not on, the peripherals connected to the down-
stream ports will not operate.
• When the monitor is in a power saving mode, the connected USB
compliant devices will operate.
Monitor USB Function Setup
Before the setup, connect the monitor to the PC with the signal cable (see
page 18) and turn on the PC.
(For Windows 98)
1) Connect the upstream port of the monitor to the downstream port of the
USB compliant PC or another hub using the EIZO USB cable (MD-
C93).
• When connecting the USB cable, check that the shape of the connector
at the cable side matches the shape at the connecting side.
2) "Unknown Device" is found on the "Add New Hardware Wizard"
screen. "Generic USB Hub" should be chosen. Click "Next".
62
3
MAKING USE OF USB
the USB compliant PC
Downstream
(Desktop Stand Type Only)
Upstream Ports
EIZO USB
Upstream Port:
Cable
Connect the USB compliant
(MD-C93)
PC or another hub using the
To Downstream
EIZO USB cable (MD-C93).
Ports of the PC
or Another Hub
Upstream connector
Advertisement
Table of Contents
