Eizo ColorEdge CE240W User Manual page 36

7. TROUBLESHOOTING
Problems
18.The Auto adjustment switch does not operate.
19.PC is hung up. / The peripherals connected to the
downstream ports do not operate.
20.USB function cannot be setup.
36
Points to check with PossibleSolutions
• Check that there is nothing left on the face of Auto
Adjustment switch. Wipe the control panel, and then touch
the Auto Adjustment switch again with dry finger.
• The adjustment lock is probably on. To unlock: turn the LCD
monitor off. Then, while touching the Auto Adjustment switch,
turn the power on.
• Check that the USB cable is correctly connected.
• Check the downstream ports by connecting the peripherals
to other downstream ports. If the problem is solved by doing
this, contact an EIZO dealer. (For details, refer to the manual
of the PC.)
• Try executing the following method.
•Restarting the PC
•Connecting the PC and peripherals directly
If the problem is solved by doing this, contact an EIZO dealer.
• Check that the USB cable is correctly connected.
• Check that the PC and OS are USB compliant. (For
verification of USB support, consult the manufacturer of each
system.)
• Check the PC's BIOS setting for USB. (For details, refer to
the manual of the PC.)