Eizo ColorEdge CE240W User Manual page 14

2. CABLE CONNECTION
4
Lead the power cord and signal cable into the cable holder at rear of the monitor.
NOTE
• The cables are recommended to lead with slight sag for the smooth motion of the stand.
5
Adjust the "height", "front and back position" and "angle" of the monitor.
1. Adjust the height of the monitor. To heighten, push the monitor backward. To lower, pull
the monitor forward.
Grip both side of the center part
of the monitor and move slowly
(refer to the right figure.)
2. Adjust the position and angle of the monitor. To adjust the angle of the monitor, hold the stand
with one hand and tilt the monitor with another hand by holding the upper side of the cabinet.
3. If necessary, fine adjust the height of the monitor.
14
Move slowly
Both Side of Center
Part of the Monitor