Eizo ColorEdge CE240W User Manual page 28

4. ADJUSTMENT
Adjustment Contents
Menu
Brightness
Temperature
Gamma
Saturation
Hue
Gain
6 colors
Reset
28
Function Descriptions
To set the brightness of the screen
Tips
• The values shown in the "%" are available only as a reference tool.
• Directly touching the Up and Down switches also adjusts the brightness. Touch the
Enter switch to save and exit the settings after the adjustment.
To set the color temperature
Tips
• Setting the value to "Off" presents the natural color temperature of the panel.
• The values shown in the Kelvin are available only as a reference tool.
• Setting the temperature under 4000 K or over 10000 K invalidates the color
temperature setting. (The color temperature's setting turns "OFF".)
• Setting the <Gain> invalidates the <Temperature> adjustment.
To set the gamma value
Tips
• If setting the gamma value, the using the monitor in the digital signal input is
recommended. If using the monitor in the analog input signal, set the gamma value
from 1.8 to 2.2.
To change the saturation
NOTE
• The <Saturation> adjustment may cause undisplayable color tone.
To change the flesh color, etc.
NOTE
• Using <Hue> adjustment may not obtain proper tone reproduction.
To change each color
(red, green and blue)
Tips
• The values shown in the "%" are available only as a reference tool.
To adjust <Saturation> and <Hue> in
each color (Red, Yellow, Green, Cyan,
Blue and Magenta)
To return the color settings to the
default settings
Adjustable range
0~100%
4000K~10000K
in 500 K increments (including 9300 K)
1.8~2.6
-100~100
Setting the minimum level (-100) turns the
image to the monochrome.
-100~100
0~100%
By adjusting the red, green and blue color
tones for each mode, custom colors can be
defined. Display a white or gray background
image and adjust the <Gain>.
Hue: -100 ~ 100
Saturation: -100 ~ 100
Select the <Reset>.