Vivitar ViviCam E128 User Manual page 7

Note:

After the camera is powered on, an SD icon appears on the LCD display. If you do not
see the SD icon on the display, please check if the card was inserted properly.

Make sure the SD card is not locked (check the lock switch on the side of the SD card). If
the SD card is locked this will prevent the camera from saving captured photos to the SD card.
POWER ON
Press the POWER button to turn on the digital camera.
CAMERA INITIAL SETUP
After powering the camera ON for the first time the camera will take you through the initial
camera setup.
SETTING THE CAMERA LANGUAGE
1) You will first be prompted to select a language for the camera. The Language selection
menu will appear. Select the language of your choice by pressing the UP and DOWN
direction control buttons.
2) Then press the SET button to confirm the selection.
6