Quectel BG96 Manual page 14

SMS
(U)SIM Interface
Audio Feature*
USB Interface
UART Interfaces
AT Commands
Network Indication
Antenna Interfaces
Physical Characteristics
Temperature Range
Firmware Upgrade
RoHS
NOTES
1. "*" means under development.
1)
2. Within operation temperature range, the module is 3GPP compliant.
BG96_Hardware_Design
Text and PDU mode
Point to point MO and MT
SMS cell broadcast
SMS storage: ME by default
Support USIM/SIM card: 1.8V, 3.0V
Support one digital audio interface: PCM interface
Compliant with USB 2.0 specification (slave only) and the data transfer rate
can reach up to 480Mbps
Used for AT command communication, data transmission, GNSS NMEA
output, software debugging and firmware upgrade
Support USB serial drivers for Windows 7/8/8.1/10, Linux 3.x(3.4 or
later)/4.1~4.15, Android 4.x/5.x/6.x/7.x/8.x/9.x
UART1:

Used for data transmission and AT command communication

115200bps by default

The default frame format is 8N1 (8 data bits, no parity, 1 stop bit)

Support RTS and CTS hardware flow control
UART2:

Used for module debugging and log output

115200bps baud rate
UART3:

Used for outputting GNSS data or NMEA sentences

115200bps baud rate
3GPP TS 27.007 and 3GPP TS 27.005 AT commands, as well as Quectel
enhanced AT commands
One NETLIGHT pin for network connectivity status indication
Main antenna (ANT_MAIN) and GNSS antenna (ANT_GNSS) interfaces
Dimensions: (26.5± 0.15)mm × (22.5± 0.15)mm × (2.3± 0.2)mm
Weight: approx. 3.1g
Operation temperature range: -35° C ~ +75° C
Extended temperature range: -40° C ~ +85° C
Storage temperature range: -40° C ~ +90° C
USB interface, DFOTA
All hardware components are fully compliant with EU RoHS directive
LPWA Module Series
BG96 Hardware Design
1)
2)
13 / 79