NETGEAR Nighthawk Pro XR300 User Manual page 11

Table 1. LED descriptions
LED and Button
Power LED
Internet LED
2.4 GHz WiFi LED
5 GHz WiFi LED
Guest WiFi LED
USB 3.0 port LED
Hardware Setup
Nighthawk Pro Gaming Router
Description
Solid amber. The router is starting.
Blinking amber. The firmware is upgrading, or the Reset button was pressed.
Solid white. The router is ready.
Off. Power is not supplied to the router.
Solid white. The Internet connection is ready.
Solid amber. The router detected an Ethernet cable connection to the modem.
Off. No Ethernet cable is connected between the router and the modem.
Solid white. The 2.4 GHz WiFi radio is operating.
Blinking white. The router is sending or receiving WiFi traffic.
Off. The 2.4 GHz WiFi radio is off.
Solid white. The 5 GHz WiFi radio is operating.
Blinking white. The router is sending or receiving WiFi traffic.
Off. The 5 GHz WiFi radio is off.
Solid white. The guest WiFi network is operating.
Blinking white. The router is sending or receiving WiFi traffic.
Off. The guest WiFi radio is off in both the 2.4 GHz band and the 5 GHz band.
Solid white. A USB device is connected and is ready.
Blinking white. A USB device is plugged in and is trying to connect.
Off. No USB device is connected, or someone clicked the Safely Remove
Hardware button and it is now safe to remove the attached USB device.
11 User Manual