Table of Contents
Advertisement
Your settings are saved.
Configure WPA/WPA2 Enterprise WiFi
Security
Remote Authentication Dial In User Service (RADIUS) is an enterprise-level method for
centralized Authentication, Authorization, and Accounting (AAA) management. To
enable the router to provide WPA and WPA2 enterprise WiFi security, the WiFi network
that the router provides must be able to access a RADIUS server.
Tip: If you want to change the WiFi settings of the router's main network, use a wired
connection to avoid being disconnected when the new WiFi settings take effect.
To configure WPA and WPA2 enterprise security:
1. Launch a web browser from a computer or mobile device that is connected to the
router network.
2. Enter http://www.routerlogin.net.
A login window opens.
3. Enter the router user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The Dashboard displays.
4. Depending on the WiFi network that you are configuring, do one of the following:
• If you are configuring the main WiFi network, select Settings > Setup > Wireless
Setup.
The Wireless Settings page displays.
• If you are configuring the guest WiFi network, select Settings > Setup > Guest
Network.
The Guest Network page displays.
5. In the Security Options section for either the 2.4 GHz band or 5 GHz band, select
the WPA/WPA2 Enterprise radio button.
The page adjusts.
Manage the Router's WiFi
Settings
Nighthawk Pro Gaming Router
105
User Manual
Advertisement
Table of Contents
