Edimax WP-S1000 User Manual page 46

Wireless projector server
Hide thumbs Also See for WP-S1000:
Table of Contents

Advertisement

6. Ask your network administrator or a qualified technician for help.
The image
1. Make sure the video cable is securely connected to 'VGA' jack at
displayed on
projector or CRT /
LCD monitor is
2. Make sure the projector or CRT/LCD monitor works with the video
distorted
3. Replace the video cable used to connect the projector server and
4. Contact your projector or CRT/LCD monitor manufacturer for help.
The wireless
1. If you're using this projector server in an extremely big room, you
signal reception is
bad
2. Move your computer closer to the projector server if possible, or
3. The wireless antenna on the projector server should be
Cannot connect
1. If you set the projector server to use wireless encryption, all
wirelessly to the
projector server
2. Make sure the SSID of the projector server is found by your
3. Reboot your computer and try again.
No audio
1. Check the volume setting of your computer and your audio
2. Check the audio cable that connects the projector server and your
3. Replace the audio cable with a new one.
also use a pen or pin to press the 'RESET' button located at the
back of projector server.
the back of the projector server. You may also check the video
connection to the projector or CRT/LCD monitor.
output setting of projector server. You can change to a lower
resolution and see if the display on projector or CRT/LCD monitor
becomes normal (see Chapter 5.7 for detailed instructions for
changing the output resolution).
your projector or CRT/LCD monitor with a new one.
may wish to try another antenna with high signal gain for better
signal reception. Contact your dealer of purchase for detailed
information. DO NOT ATTEMPT TO REAPLCE THE ANTENNA
BY YOURSELF IF YOU'RE NOT SURE WHAT ANTENNA YOU
SHOULD USE!
use wired connection.
perpendicular to the ground for better reception.
wireless clients should input the correct WEP key before they can
get connected.
computer, and you connect to the correct SSID for the projector
server.
speaker / amplifier.
audio speaker / amplifier.
45

Advertisement

Table of Contents
loading

Table of Contents