Table of Contents
Advertisement
13. You'll be prompted to enter Login Code, which is a 4-digit number displayed at the
upper-left corner of the WPS. Enter Login Code and click 'OK' to connect to the WPS.
You will be connected and the WPS will project your PC screen to the projector
automatically.
14. You need to plug-in the USB flash disk into your computer during your presentation. If you
unplug the USB flash disk from your computer, you are unable to re-connect to the WPS
once you close the Presentation Client Software.
NOTE: Login code
WILL CHANGE when:
a. Projector server rebooted.
b. User logged out and when
login again.
IP Address of
the WPS
18
Advertisement
Table of Contents
