Panasonic CQ-VD5005U Service Manual page 11

5.2. How to Disassemble & assemble
How to disassemble
First take off the monitor block
and must be as shown above.
How to assemble
Insert the flat cable.
(Caution for inserting diagonally)
All manuals and user guides at all-guides.com
Remove the screws from the 3
spots as shown above labled with
circles.
Match the mounting spots of the deck ass'y and fasten
them with 2 screws.
The deck ass'y must be inside the front plate of the under
cover.
Importan
Match the connector bracket with the slit of the RCA cord ass'y
and fasten them with 3 screws.
Do not let the ANT receptacle wires get jammed.
11
Take off the metal that fixes the
connecter and remove the screws
from the 2 spots labled with circles.
Remove the deck block and it is
done.
Remove the screws from the
2spots labled with circles.
Must be situated as shown above
then remove the locks on the flat
cable of the deck.
Importan
With pad on the rear side of the deck
ass'y, there must me no gap between
the deck ass'y and the tuner shield case.
Fasten the 2 parts labeled with a
circle with screws.