York YK Installation Instructions Manual page 3

FORM 160.75-N3
ISSUE DATE: 04/15/2019
In complying with Johnson Controls' policy for con-
tinuous product improvement, the information con-
tained in this document is subject to change without
notice. Johnson Controls makes no commitment to
update or provide current information automatically
to the manual or product owner. Updated manuals, if
applicable, can be obtained by contacting the nearest
Johnson Controls Service office or accessing the John-
son Controls QuickLIT website at
johnsoncontrols.com.
It is the responsibility of rigging, lifting, and operating/
service personnel to verify the applicability of these
documents to the equipment. If there is any question
Installation Checklist/Start-Up Request
Unit Start-Up Checklist
Installation - Unit
Installation - MV VSD - 2300 VAC – 6600 VAC
Installation - MV VSD - 10 kV – 13.8 kV
Wiring Diagrams - Field Connections - Unit-Mounted SSS, MV SSS, or Remote Mounted MV SSS, MV EMS
Wiring Diagrams - Field Connections - Remote Mounted MV SSS
Wiring Diagrams - Field Connections - Remote Mounted MV VSD
Wiring Diagrams - Field Connections - LV VSD
Wiring Diagrams - OptiView Control Center and EMS
Wiring Diagrams - OptiView Control Center and EMS with the LTC I/O Board
Wiring Diagrams - OptiView Control Center and SSS, LV VSD, MV VSD
Wiring Diagrams - OptiView Control Center and SSS, LV VSD, MV VSD with the LTC I/O Board
Wiring Diagrams - Field Control Modifications
Unit Operation and Maintenance
Operation OptiView Panel
Operation - Variable Speed Drive - TM Model
Operation and Maintenance - Solid State Starter (Mob "B")
Operation - Variable Speed Drive - VSD and LVD Model
Operation - Variable Speed Drive - HYP Model
Operation - Floor Mounted MV SSS, Manufactured Before 2007
Operation - Floor Mounted MV SSS, Manufactured After 2007
Operation - Unit Mounted MV SSS
Operation - MV VSD - 2300 VAC – 6600 VAC
Operation - MV VSD - 10 kV – 13.8 kV
Service Policy - Shipping Damage Claims
JOHNSON CONTROLS
CHANGEABILITY OF THIS DOCUMENT
http://cgproducts.
ASSOCIATED LITERATURE
MANUAL DESCRIPTION
regarding the applicability of these documents, rig-
ging, lifting, and operating/service personnel should
verify whether the equipment has been modified and
if current literature is available from the owner of the
equipment prior to performing any work on the chiller.
CHANGE BARS
Revisions made to this document are indicated with a
line along the left or right hand column in the area the
revision was made. These revisions are to technical in-
formation and any other changes in spelling, grammar
or formatting are not included.
FORM NUMBER
160.75-CL1
160.75-CL2
160.75-N1
160.00-N6
160.00-N8
160.75-PW1
160.75-PW2
160.75-PW3
160.54-PW6
160.75-PW5
160.75-PW7
160.75-PW6
160.75-PW8
160.75-PW4
160.75-O1
160.54-O1
160.00-O1
160.00-O2
160.00-O4
160.00-O10
160.00-O5
160.00-O5.1
160.00-O7
160.00-O6
160.00-O8
50-15-NM
3