Table of Contents
Advertisement
About this task
The following image indicates the location of the 2.5-inch hard-drive assembly and provides a visual representation of the
installation procedure.
Steps
1. Align the hard-drive assembly at an angle to the slot on the computer.
2. Press the release tabs on the hard-drive bracket and slightly align back to insert the hard-drive assembly to the slot on the
computer chassis.
3. Connect the hard-drive data and power cables to the connectors on the 2.5-inch hard-drive module.
Next steps
1. Install the
fan
duct.
2. Install the
side
cover.
3. Follow the procedure in
after working inside your
computer.
Removing and installing components
21
Advertisement
Table of Contents
