Steps
1. Position the fan duct to align it with the slots on the computer chassis.
2. Press the fan duct until it clicks into place.
Next steps
1. Install the
side
cover.
2. Follow the procedure in
2.5-inch hard-drive assembly
Removing the 2.5-inch hard-drive assembly
Prerequisites
1. Follow the procedure in
2. Remove the
side
cover.
3. Remove the
fan
duct.
About this task
The following images indicate the location of the 2.5-inch hard-drive assembly and provide a visual representation of the
removal procedure.
after working inside your
before working inside your
computer.
computer.
Removing and installing components
17