8.
Remove the bottom cover (3).
To replace the bottom cover, reverse the removal procedures.
Battery
To remove the battery, use this procedure and illustration.
Table 5-2
Battery description and part number
Description
Battery (2 cell, 47 Whr, includes cable)
Before removing the battery, follow these steps:
1.
Prepare the computer for disassembly (see
2.
Remove the bottom cover (see
Remove the battery:
1.
Disconnect the battery cable (1) from the system board.
2.
Release the speaker cable from the retention clips (2) and routing channel built into the front edge of the
battery.
3.
Remove the four Phillips M2.0 × 4.0 screws (3) that secure the battery to the computer.
Preparation for disassembly on page
Bottom cover on page
27).
Spare part number
L75783-006
27).
Battery
29