Heatilator MERID36IN Owner's Manual page 15

Table of Contents

Advertisement

- Wait five (5) minutes to allow possible
accumulated gas to clear.
- Set the IFT-ECM 3-position selector switch to ON
or REMOTE position. Module will beep once and
flash a three GREEN LED code on successful
startup.
- If placed in ON position, the appliance will ignite
normally if the error condition was corrected.
- If placed in REMOTE position, use the paired IFT-
RC400, IFT-RC150 or wired wall switch to start
the appliance; appliance will ignite normally if the
error condition was corrected.
- If the IFT-ECM re-enters the lock-out condition
after these steps, call your dealer for service.
Majestic • MERID36IN, MERID36IL, MERID42IN, MERID42IL Owner's Manual • 2517-981 Rev. E • 1/19
TM
IntelliFire
Touch Ignition System
NOTICE: Batteries should not be placed in the battery
pack while using the transformer. Remove batteries before
using the transformer, and unplug the transformer before
installing the batteries. Battery polarity must be correct or
module damage will occur.
Appliance ON/OFF:
A wall control, thermostat or remote control may be used
to control the ON/OFF function of the appliance. Follow
instructions included with the installed control.
®
Optional Heat-Zone
-Gas Kit
The Heat-Zone
®
-Gas heat management option is avail-
able for use with the MERID36I and MERID42I appli-
®
ances. The Heat-Zone
-Gas Kit draws heat from your
fireplace to an adjacent room in your home, up to 20 feet
away.
Optional Heat-Out-Gas Kit
The Heat-Out-Gas heat management option is available
for use with the MERID36I and MERID42I appliances and
must be used in conjunction with the IFT-RC400 remote
control. The Heat-Out-Gas kit draws heat from your
fireplace and directs it outside, up to 25 feet away.
Optional Heat-Duct Kit
The Heat-Duct heat management option is available for
use with the MERID36I and MERID42I appliances. The
Heat-Duct redistributes heat from the fireplace via the
furnace ductwork.
Optional Fan Kit
If desired, a fan kit may be added. Contact your dealer
to order the correct fan kit. Detailed instructions are in-
cluded with the fan kit.
15

Advertisement

Table of Contents
loading

This manual is also suitable for:

Merid36ilMerid42inMerid42il

Table of Contents