Interrupting A Cooking Cycle; Cancelling A Cooking Cycle; Enquiry Mode - Baumatic BMIC4625 Manual

Interrupting a cooking cycle

o If you wish to temporarily interrupt a cooking cycle when it is in
progress (for example to stir what you are heating), you should
press the door button (I).
o The door of the microwave will open and it will stop heating
immediately.
o To restart the cooking cycle, close the microwave door and then
press the start button (H).

Cancelling a cooking cycle

o If you wish to cancel a cooking cycle when it is in progress, you
should press the stop/clear button (E).
o The microwave will stop heating immediately, give an audible
signal and the LED display (A) will return to showing the time of
day.
o Use the door button (I) to open the door of the microwave.
o IMPORTANT: The inside of the microwave and the food that
you have been cooking may be extremely hot. So care should be
taken when removing items from the microwave.
o After the food has been removed from the microwave, you
should make sure that the door is closed.

Enquiry mode

o Whilst the microwave is in use, the LED display (A) will
countdown the cooking time that you have set.
o To check the power level that the microwave is cooking at, press
the microwave
appear on the LED display (A) for a few seconds.
o To check the time of day, press the kitchen timer/clock button
(D) and the time of day will flash on the LED display (A) for a
few seconds.
button (B) a nd the power level will
21