Flash Mode - Kodak PIXPRO AZ527 User Manual

Flash Mode

The flash provides supplemental light for the scene. The flash is usually used when
shooting against the light to highlight the object; it is also suitable for metering and
shooting in darker scenes to improve the exposure.
It can be adjusted in
the settings:
1. Press the Flash Button
the flash.
2
2. Press the button to enter the
Flash menu.
3. Press the /
select the following 6 modes:
• Force Off
Flash is turned off.
mode, please follow the steps below to configure
to pop up
1
Force Off
button to
• Flash Auto
Camera flash goes off
automatically based on existing
light conditions.
• Fill Flash
The flash will engage with each
shot even if there is enough
available light to take the photo
without flash.
• Slow Sync.
This allows you to take pictures
of people at night that clearly
show both your subjects and
the night time backdrop. The
use of a tripod is recommended
when shooting with this setting.
• Slow Sync. + Red-Eye
Use this mode for slow synchro
shots with red-eye reduction.
• Red-Eye Reduction
The camera emits a brief pre-
flash before the picture is taken
to reduce red-eye effects.
4. Press the button to confirm the
settings and enter the shooting screen.
57