Kodak PIXPRO AZ527 User Manual page 41

AP mode
This camera may connect with your smart
device through Wi-Fi.
Settings of Camera:
1. Select
enter the setting interface.
Setting pre-connected device for the
following serial number:
SSID: PIXPRO AZ527_XXXX
WPA2 PSK: XXXXXXXX
Press the
select:
• Refresh: Create a new WPA2 PSK
password
• Back: Back to previous page
40
and press the button to
AP mode
Refresh
Back
/ button to
Settings of Smart Device:
2. Enable the Wi-Fi of smart device and
then search surrounding wireless
devices.
3. Select the name of camera SSID to be
connected and then input the eight-
digit number password after WPA2 PSK
on the camera.
4. Click the icon of the APP
the APP.
Set up completion:
5. Once the APP is connected to the
camera, functional operations can be
enabled on the smart device.
to enable