HoMedics BPA-060 Manual page 11

Display Symbols:
essure
If
the area that systolic pressure should be displayed, an error has
astolic
occurred with your reading. See Troubleshooting section of this
essure
manual for more information.
User 1: Appears when the monitor is operated by User 1.
User 2: Appears when the monitor is operated by User 2.
Weak Battery Symbol: Appears when batteries should be
replaced.
Pulse Symbol: Shows the heart rate per minute.
Risk Category Index: See page 20 for more information.
Memory Average: Displays average of last 3 readings
START
START START
STOP
STOP
STOP
and any of the following letters and numbers appear in
START
STOP
Measurement Error: Wrap the cuff correctly and keep
arm steady during measurement. Measure again.
Air Circuit Abnormality: Check cuff connection. Measure
again.
Pressure Exceeding 300 mmHg: Turn the unit off to
clear, then measure again.
Error Determining Measurement Data: Measure again.
System Error: Measure again.
10