BT BT3880 Quick Setup And User Manual page 5

Quick set-up guide
2. Charge
1. Activate the batteries by pulling
the plastic tab away from the
bottom of
the handset.
2. The handset will then check for a
link with the base station. When it's
found it.
3. Place the handset on the base
and let it charge for 16 hours.
4. After 16 hours, plug the phone
line cord into the phone wall socket.
4
If you need some help, call us on 0800 218 2182* or go to bt.com/producthelp
Rechargeable batteries
already fitted
Remove this tab
and charge batteries
for 16 hours before use.
Talk/Standby time
Under ideal conditions, the
handset batteries should give
up to 12 hours talk time or
120 hours standby on a single
charge. (This doesn't mean you
can unplug the base or leave
the handset for this length of
time without charge).
Please note that new Ni-MH
rechargeable batteries don't
reach full capacity until
they've been in normal use
for several days.
Battery low warning
You will hear a warning beep
every 2 minutes during a call
and the icon will flash.
You must recharge the
handset batteries before you
can use the handset. If the
charge completely runs out
the handset will switch off.
Place the handset on the base
or charger to charge.
5