Samsung SyncMaster 7 Series User Manual page 44

Network Features
Your product supports only the following wireless network security protocols:
– Authentication Mode : WEP, WPAPSK, WPA2PSK
– Encryption Type : WEP, TKIP, AES
✎
To use a wireless network, your product must be connected to a wireless IP sharer (either a router or a modem).
If the wireless IP sharer supports DHCP, your product can use a DHCP or static IP address to connect to the
wireless network.
✎
Select a channel for the wireless IP sharer that is not currently being used. If the channel set for the wireless IP
sharer is currently being used by another device nearby, this will result in interference and communication failure.
✎
If you select the Pure High-throughput (Greenfield) 802.11n mode and the Encryption type is set to WEP or TKIP
WEP or TKIP on your AP or wireless router, Samsung products will not support a connection in compliance with
new Wi-Fi certification specifications.
✎
If your wireless router or modem supports WPS (Wi-Fi Protected Setup), you can connect to the network via PBC
(Push Button Configuration) or a PIN (Personal Identification Number). WPS will automatically configure the SSID
and WPA key in either mode.
✎
If your router, modem, or device is not certified, it may not connect to the product.
✎
Connection Methods: You can set up the wireless network connection in three ways:
– Auto Setup (with the Auto Network Search function)
– Manual Setup
– WPS(PBC)
English - 43