Advanced Features
Listening through a Receiver
You can listen to sound through a receiver (i.e. Home Theater) instead of the product Speaker. To listen to sound
through a receiver, go to
Receiver
On.
✎
If your receiver supports audio only, it may not appear in the device list.
✎
The receiver will work when you have properly connected the optical in jack of the receiver to the DIGITAL AUDIO
OUT (OPTICAL) port of the product.
✎
When the receiver (i.e. Home Theater) is set to On, you can hear sound output from the product's Optical jack.
When the product is displaying a DTV (air) signal, the product will send out 5.1 channel sound to the receiver.
When the source is a digital component such as a DVD player and it is connected to the product via HDMI, you
will hear only 2 channel sound from the receiver.
Using the ARC function
You can listen to sound from the product through a receiver connected using an HDMI cable without connecting a
separate optical cable. To listen to sound through a receiver using the ARC function, go to
Anynet+ (HDMI-CEC)
→ Receiver). Then select
✎
To use the ARC function, a receiver which supports the HDMI-CEC and ARC features must be connected to the
HDMI IN 2 (MHL / ARC) port.
✎
To disable the ARC function, set the
the receiver will be blocked from receiving the signal.
screen
(System
→
Anynet+ (HDMI-CEC)
Receiver
and set to On.
Receiver
to Off. Even if the product transmits the ARC signal continuously,
English - 121
→ Receiver). Then select
Receiver
Receiver
screen
and set to
→
(System