Table of Contents
Advertisement
Advanced Features
Setting up Anynet+ (HDMI-CEC)
Anynet+ (HDMI-CEC)
•
To use the Anynet+ Function,
✎
When the
Anynet+ (HDMI-CEC)
•
Auto Turn Off
Set an Anynet+ Device to turn off automatically when the product is turned off.
✎
If
Auto Turn Off
is set to Yes, running external devices will turn off at the same time as the product powers off.
✎
May not be enabled depending on the device.
Receiver
•
You can listen to sound through a receiver (i.e. Home Theater) instead of the product Speaker.
Switching between Anynet+ Devices
1. Open the
Tools
menu using your remote, and then select
2. Select
Device
List. The
✎
If you cannot find a device you want, select
3. Select a device, and then wait until the switch to the selected device is completed.
✎
The
Device List
menu appears only when you set
✎
Switching to the selected device may take up to 2 minutes. You cannot cancel the switching operation while
switching is in progress.
✎
If you have selected an Anynet+ device using the
sure to switch to an Anynet+ device using the
Anynet+ (HDMI-CEC)
function is disabled, all the Anynet+ related operations are deactivated
Device List
screen appears.
Refresh
English - 120
must be set to On.
Anynet+
(HDMI-CEC).
to refresh the list.
Anynet+ (HDMI-CEC)
Source
function, you cannot use the Anynet+ function. Make
Device List
function.
to
On
in the
System
menu.
Advertisement
Table of Contents
