Opel Vivaro Manual page 35

Rear seat access
To facilitate access to the rear seats,
fold the seat backrest forwards. If
necessary release the two-latch seat
belt from its buckles.
9 Warning
Ensure that the backrest returns to
its correct position and the seat
belt buckles engage securely.
Fitting seat belt 3 38.
Folding seats
On some variants, the cargo area can
be increased by folding up the rear
seats.
Remove the head restraints 3 30. Pull
the side handle to release the
backrest and fold forward onto the
seat base, if necessary releasing the
two-latch seat belts from their
buckles.
Release both locking bars at the rear
base of the seat by pulling rearwards.
Lift and fold the seat assembly, until
the seat frame rests in place.
Seats, restraints
9 Warning
When folding the seat use caution
- beware of moving parts. Ensure
the seat is secure when
completely folded.
To return the folding seat to the
upright position, support the seat
assembly and release the bar by
pulling the bar directly towards you.
Gradually lower the seat assembly,
allowing the rear support legs to fold
down. Lower the seat completely,
ensuring the rear support legs are
located, and latched.
35