EchoStar DVR-5000 HDD Service Note page 20

Operation
Section 5
6. Either:
a. press the WHITE key to confirm the lock and
end the session, or
b. select the next channel you want to lock.
7. When the pop-up appears, either:
a. select Yes to save the changes, or:
b. select No to undo the changes.
8. You can temporarily unlock all channels:
a. On the RCU, press the MENU key;
b. the key to select the
c. the OK key, to select the
d. Enter the correct PIN-code as requested;
e. Set the channel lock to Off.
9. You can restore all the locks on the channels:
a. On the RCU, press the MENU key;
b. the key to select the
c. the OK key, to select the
d. Enter the correct PIN-code as requested;
e. Set the channel lock to On.
1.3.3. TO DELETE A CHANNEL
1. On the RCU, press the OK key.
2. In the Edit menu, select the DELETE option.
3. Read the available help text for information.
4. Go to the channel you want to delete.
5. On the RCU, press the OK key:
a. Note a red bullet appears behind the selection
and the cursor advances to the next channel.
b. If you want to undo a selection (red bullet),
select again and press the OK key.
Page 5 - 4
menu;
menu.
menu;
menu.
EchoNAV 2.0