DeWalt DWH161 Manual page 10

English
2. For long storage, it is recommended to store a fully charged
battery pack in a cool, dry place out of the charger for
optimal results.
nOTE: Battery packs should not be stored completely
depleted of charge. The battery pack will need to be recharged
before use.
Labels on Charger and Battery Pack
In addition to the pictographs used in this manual, the labels
on the charger and the battery pack may show the following
pictographs:
Read instruction manual before use.
See Technical Data for charging time.
Do not probe with conductive objects.
Do not charge damaged battery packs.
Do not expose to water.
Have defective cords replaced immediately.
Charge only between 4 ˚C and 40 ˚C.
Only for indoor use.
Discard the battery pack with due care for
the environment.
Charge D WALT battery packs only with designated
e
D WALT chargers. Charging battery packs other
e
than the designated D
D WALT charger may make them burst or lead to
e
other dangerous situations.
Do not incinerate the battery pack.
USE (without transport cap). Example: Wh rating
indicates 108 Wh (1 battery with 108 Wh).
TRANSPORT (with built-in transport cap). Example:
Wh rating indicates 3 x 36 Wh (3 batteries of 36 Wh).
Battery Type
The DWH161 operates on a 18/20 MAX volt battery pack.
These battery packs may be used: DCB181, DCB182, DCB183,
DCB183B, DCB184, DCB184B, DCB185, DCB187, DCB189,
DCB546, DCB547, DCB548. Refer to Technical Data for
more information.
8
WALT batteries with a
e
Package Contents
The package contains:
1 Universal dust extractor
1 Crevice tool
1 Carry strap
1 Belt hook
1 Stepped dust nozzle adaptor
1 Screw
1 Charger
1 Li-Ion battery pack (C1, D1, L1, M1, P1, S1, T1, X1, Y1 models)
2 Li-Ion battery packs (C2, D2, L2, M2, P2, S2, T2, X2, Y2 models)
3 Li-Ion battery packs (C3, D3, L3, M3, P3, S3, T3, X3, Y3 models)
1 Instruction manual
nOTE: Battery packs, chargers and kitboxes are not included
with N models. Battery packs and chargers are not included with
NT models. B models include Bluetooth® battery packs.
nOTE: The Bluetooth® word mark and logos are registered
trademarks owned by the Bluetooth®, SIG, Inc. and any use of
such marks by D WALT is under license. Other trademarks and
e
trade names are those of their respective owners.
• Check for damage to the dust extractor, parts or accessories
which may have occurred during transport.
• Take the time to thoroughly read and understand this manual
prior to operation.
Markings on Dust Extractor
The following pictograms are shown on the dust extractor:
Read instruction manual before use.
Date Code Position (Fig. F)
The date code 14 , which also includes the year of manufacture,
is printed into the housing surface that forms the mounting
joint between dust extractor and dust box.
Example:
2019 XX XX
Year of Manufacture
Description (Fig. A)

WARNING: Never modify the dust extractor or any part of
it. Damage or personal injury could result.
Battery pack
1
Battery release button
2
Dust collection box
3
Dust collection box release
4
buttons
Filter cleaning mechanism
5
Dust extractor hose
6
Three position switch
7
Wireless Tool Control™
8
pairing button
LED
9
Carry strap
10
Carry strap hooks
11
Crevice tool
12