Receiving A Fax - Sony VGN-SZ110 Bluetooth&reg User Manual

Receiving a fax

This section describes what to do when a fax arrives after you have established a connection to a modem station.
Important
 The Fax service must be enabled for receiving in order for you to receive a fax.
Please refer to "Using a wireless modem
once the fax service has been configured.
 Please ensure you have connected to a modem station before you receive a fax (the device will be connected to the modem if "Enable
Receive" has been selected or
Procedure
1. When a fax arrives, the Fax Monitor will start automatically as the fax is received
Once the fax has been received, the Fax Monitor will revert to standby mode.
Note
o If you have enabled manual fax reception, the message below will appear when a fax arrives.
Click on the message with your mouse to receive the fax.
2.
Double-click on the [Fax] icon in the Control Panel
The [Fax Console] window will appear.
3. In the [Fax Console] window, double-click on the fax that has arrived
station" under "Troubleshooting" for information on how to change the send and receive settings
COM Auto Connect has been activated).
Page 80