Sony VGN-SZ110 Bluetooth&reg User Manual page 557

Using a modem station for fax transmissions
This section describes how to send a fax using a Bluetooth
→Setting up the modem station
→Setting fax information
→Sending a fax
→Receiving a fax
Important
Please refer to the modem station instruction manual for information on how to connect the station to a telephone line.

Please ensure that any drivers used to connect the PC to the modem have been installed.

 A Bluetooth passkey (PIN code) is required for you to connect to the modem station. Please make a note of your Bluetooth passkey before
you start the set-up process.
 A fax application is required for you to be able to send and receive faxes. The description below is based on a example using Microsoft Fax,
which is installed with Windows XP as standard.
If you are going to use a commercially available fax
on how to send and receive faxes.
Setting up the modem station
Set up and register the modem station as a fax service.
Procedure
1. Turn on the wireless modem station
2. Right-click on the Bluetooth
Note
o Alternatively, click [Start]→[All Programs]→[Bluetooth]→[Bluetooth Settings], and then click on [New Connection] from the
active [Bluetooth Settings] window.
The [Add New Connection Wizard (Welcome to the Add New Connection Wizard)] window will appear.
wireless modem station.
TM
application, then please refer to the manual that came with the application for information
wireless technology icon in the task tray, and then click on [Add New Connection]
TM
[FAX]
Page 557