Before First Use; Settings - AEG L7FEC41S User Manual

Table of Contents

Advertisement

20
www.aeg.com

8. BEFORE FIRST USE

1. Make sure that all transit bolts have
been removed from the appliance.
2. Make sure that the electrical power is
available and the water tap is open.
3. Pour 2 litres of water into the
detergent compartment marked by
.
This action activates the drain system.

9. SETTINGS

9.1 Child Lock
With this option you can prevent that the
children play with the control panel.
• To activate/deactivate this option,
touch the
simultaneously until the indicator
comes on/goes off on the display.
You can activate this option:
• After you touch the Start/Pause
button: all the buttons and the
programme dial are deactivated
(except On/Off button ).
• Before you touch the Start/Pause
button: the appliance cannot start.
The appliance keeps the selection of this
option after you switch it off.
9.2 Acoustic signals
This appliance is provided with different
acoustic signals, that operate when:
• You activate the appliance (special
short tune).
• You deactivate the appliance (special
short tune).
• You touch the buttons (click sound).
• You make a wrong selection (3 short
sounds).
• The programme is completed
(sequence of sounds for about 2
minutes).
• The appliance has a malfunction
(sequence of short sounds for about 5
minutes).
and the
buttons
4. Pour a small quantity of detergent
into the compartment marked by
5. Set and start a programme for cotton
at the highest temperature without
any laundry in the drum.
This removes all possible dirt from the
drum and the tub.
To deactivate/activate the acoustic
signals, touch the
simultaneously for about 6 seconds.
If you deactivate the
acoustic signals, they
continue operate when the
appliance has a malfunction.
9.3 Permanent Extra Rinse
With this option you can permanently
have an extra rinse when you set a new
programme.
• To activate/deactivate this option
touch the
button and the
button simultaneously the relevant
indicator comes on/goes off.
This option adds two rinses and the
display shows
9.4 Soft Plus
Set the Soft Plus option to optimise the
fabric softener distribution and improve
the fabric softness.
This option increases slightly
the programme duration.
To activate/deactivate this option touch
the
button and the
simultaneously until the
comes on/goes off above the
indicator.
.
and the
buttons
.
button
indicator

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents