TP-Link Archer VR2100 User Manual page 98

Chapter 15
shown in the following figure so that the physical connection between my PC and my
company's server is achieved. To surf the internet and visit my company's network at
the same time, I need to configure the static routing.
How can I do that?
1. Make sure the routers use different LAN IP addresses on the same subnet. Disable
Router 2's DHCP function.
2. Visit http://tplinkmodem.net, and log in with your TP-Link ID or the password you
set for the router.
3. Go to Advanced
click Save.
4. Click Add to add a new static routing entry. Finish the settings according to the
following explanations:
Modem router
LAN: 192.168.1.1
Switch
192.168.1.100
> Network > Static Routing. Select your current
Specify Your Network Settings
Company's server
Router 2
WAN: 172.30.30.100
LAN: 192.168.1.2
172.30.30.1
My PC
WAN Interface and
94