TP-Link Archer VR2100 User Manual page 66

Chapter 12
4. Select an interface name from the drop-down list. Interface names are names of
the internet connections you have set up.
5. Click Scan to select a service from the list to automatically populate the
with an appropriate port number. It is recommended to keep the default Port if you
are unsure about which one to use. If the service is not listed, manually enter the
Service Type and the
6. Click Scan to select the local host device running the service. If the device is not
listed, enter its global IPv6 address in the
7. Select a protocol for the service from the drop-down list.
8. Tick Enable This Entry
Note: If you want to disable this entry, click the
Port number (e.g., 21 or 21-25).
Internal IP
and click Save.
icon.
Network Security
field
Port field
62