E. Electrical Connection
1. Electrical connection must be made in accordance with the label provided
next to the junction box. See Fig. 3.
. Electrical connections must meet national, state, and local electrical code
requirements. Failure to meet these code requirements could cause severe
injury to individuals or extensive damage to equipment.
3. Be sure to install a proper ground to the icemaker.
• Electrical connections must be installed in accordance with applicable national, state, and
local regulations.
• Usually an electrical permit and services of a licensed electrician are required.
• The icemaker requires an independent power supply. See the nameplate for proper
voltage and breaker/fuse size.
• The maximum allowable voltage variation is ±10 percent of the nameplate rating.
• The opening for the power supply connection is 7/8" DIA to fit a 1/" trade size conduit.
WARNING
L
N
4A1169-011
Fig. 3
10