Table of Contents
Advertisement
Status Code Display Indications
Warning Indicators
This LCD Projector has a STATUS Code Display which calls
your attention to problem conditions existing inside the LCD
Projector. The LCD Projector displays a status Code
Indication each time an internal problem is detected.
If any of the following indications appear in the STATUS Code
Display, immediately turn off the Power Button,
the chart to determine a course of action.
Example: If the total lamp operating time is over 1 900 hours, the
status codes "L", "-", and "1" will be displayed in
sequence.
Note
After taking appropriate action, allow the interior to cool
thoroughly before switching on the power. A much longer
time may be required if the projector had attained an
abnormally high internal temperature.
Previous
screen
STATUS Code
display
Continued on the next page...
and then see
61
Advertisement
Table of Contents
