Engine Stop Button; Power Trim And Tilt Switch On Digital Electronic Control - Yamaha F300 Owner's Manual

Triple type
EMU35740

Engine stop button

To stop the engine, push the red button. Only
equipped on the sub station.
Single type
Twin type
Triple type
ZMU05985
EMU35152
Power trim and tilt switch on digital
electronic control
The power trim and tilt system adjusts the
outboard motor angle in relation to the tran-
som. Pressing the switch "
outboard motor up, and then tilts it up. Press-
ing the switch "
motor down and trims it down. When the
switch is released, the outboard motor will
stop in its current position. For instructions
on using the power trim and tilt switch, see
pages 77 and 79.
ZMU05986
ZMU05987
Components
" (up) trims the
" (down) tilts the outboard
UP
DN
ZMU05988
ZMU06234
37