Table of Contents
Advertisement
A960D+V3 BIOS Manual
CPU/HT Reference Clock (MHz)
This item allows BIOS to select CPU Over Clock.
Options: 200 (Default) / 200~600
Custom P-States
This item tells BIOS whether to use the setup options below this to configure
the P-States, or whether to configure the P-States automatically.
Options: Disabled (Default) / Enabled
Core FID
This item allows you to select the Ratio/Frequency of AM3 CPU.
Options: x16.0 3200MHz ~ x23.5 4700MHz (Differed by CPU)
Core VID
This function allows you to adjust the voltage of AM3 CPU.
Core DID
Options: Divided by 1 (Default) / Divided by 2 / Divided by 4 / Divided by 8
/ Divided by 16
NB VID
This item allows you to set the voltage to use for NB PState selected Value
is saved in the _PSS object.
NB FID
This item allows you to select the Frequency of NB chip.
Options: 800MHz ~ 3800MHz (Differed by CPU)
NB DID
This item allows you to select the Frequency of NB chip.
Options: Divided by 1 (Default) / Divided by 2
HT Link Speed
The HyperTransport link will run at this speed if it is slower than or equal to
the system clock and the board is capable.
Options: Auto (Default) / 200MHz / 400MHz / 600MHz / 800MHz / 1GHz /
1.2GHz / 1.4GHz / 1.6GHz / 1.8GHz / 2.0GHz / 2.2 GHz / 2.4GHz /
2.6GHz / 2.8 GHz / 3.0GHz
HT Link Width
The HyperTransport link will run at this width.
Options: Auto (Default) / 8 Bit / 16 Bit
Core Leveling
This item allows you to activate Core Leveling function.
Options: Auto (Default) / Manual
27
Advertisement
Table of Contents
