Advertisement
D. Front Housing Assembly Removal / Installation
• Remove the Dust Cup
• Remove 7x T-20 screws from front housing assembly
• Remove the Beauty Ring Front Fascia by carefully prying to disengage clip (Picture D.1)
• Remove 2x T-20 screws holding the Beauty Ring Rear Fascia to the body (Picture D.2)
• Starting where the last screws were removed work up the side where the front and rear
housings join. There are clips holding the housings together that need to be disengaged
before removing the front housing (Picture D.3)
• You may need to use two flat head screwdrivers, putty knives, etc. to work up the seam.
Pictures D.4 and D.5 show the clips in more detail
• Reassemble in reverse order
Picture D.1
Picture D.3
5
Picture D.2
Picture D.4
Advertisement
