Electrolux EL8600 Series Assembly / Disassembly Manual page 4

C. Brushroll Motor Removal / Installation
• Remove the Soleplate & Brushroll (Section A)
• Remove Hood (Section B)
• Remove 2x T-20 screws from the Brushroll Motor Cover (Picture C.1)
• Disconnect the positive and negative terminals from the motor (Picture C.2)
• Remove 1x T-20 screw from the Drive Assembly (Picture C.1)
• Lift the Drive assembly out of base and use flathead screwdriver to disengage the four
clips which hold the cover in place (Picture C.3)
• Now belt is accessible for replacement
• Reassemble in reverse order
Picture C.1
Picture C.3
4
Picture C.2