Advertisement
Note: Before any repair work is performed make sure the unit is unplugged.
Note: Prior to performing any maintenance look at the RPL to become familiar with the
part names and locations.
Before servicing remove on-board tools, hose, and dust cup to allow easier access to ma-
chine.
A. Soleplate & Brushroll Assembly Removal / Installation
• Rotate the three 1/4 Turn Locks to the "Unlock" position to remove soleplate (Picture A.1)
• Remove the brushroll
• Remove 2x T-20 screws under brushroll (Picture A.2)
• Remove 2x T-20 screws towards the back of the base. One is partially hidden by the clear
air tube, so you may need to remove the phillips screw and move it out of the way
(Picture A.3 and A.4)
• Reassemble in reverse order
Picture A.1
Picture A.3
Picture A.2
Picture A.4
2
Advertisement
